PRODUCT DESCRIPTION
All-season universal fully synthetic motor oil developed using Low SAPS technology, which provides maximum protection for systems to reduce the toxicity of exhaust gases, including diesel particulate filters (DPF). Gazpromneft Diesel Ultra LA 10W-40 belongs to the UHPD (Ultra High Performance Diesel) class and is designed for highly boosted diesel engines with turbochargers from European and other manufacturers of environmental class Euro-5 and Euro-6.
ADVANTAGES
- Low SAPS technology - Reduced content of sulfate ash, sulfur and phosphorus in the oil. Preserves the service life of the exhaust gas neutralization systems.
- Improved viscosity stability - Maintains a reliable oil film during operation. Reduces the cost of unplanned downtime.
- Improved stability of low temperature properties - Provides good pumping during the entire oil change interval. Reduces unplanned stays in the winter.
- High stability against oxidation - Reduces the formation of deposits in the cylinder-piston group. Reduces the cost of parts.
- Reliable wear protection - Provides effective lubrication in the heaviest loaded engine components. Preserves the service life of engine parts.
APPLYING
- For road equipment (commercial trucks, buses, etc.) and off-road equipment (mining, agricultural, etc.) of European and other manufacturers.
- Designed for highly boosted turbocharged diesel engines from environmental class to Euro-5, Euro-6, where the required service classification ACEA E6, E9.q
- Compatible with all modern emission control systems SCR, EGR, DPF.
- Applicable in compressed natural gas (CNG-methane) engines.
PHYSICO-CHEMICAL CHARACTERISTICS
Typical characteristics |
Method |
Gazpromneft Diesel Ultra LA 10W-40 |
Kinematic Viscosity
- at 100 °С, mm²/s
- at 40 °С, mm²/s
|
ASTM D 445
ASTM D 445
|
14.31
95.5
|
Viscosity Index |
ASTM D 2270 |
155 |
Flash Point (COC), °С |
ASTM D 92 |
254 |
Pour Point, °С |
ГОСТ 20287 |
-37 |
Total Base Number, mg KOH/g |
ASTM D 2896 |
10.2 |
Sulfated Ash, wt% |
ASTM D 874 |
1.0 |
Density
- at 20 °С, g/cm³
|
ASTM D 4052
|
0.856
|